Home
Instrument and Equipment
Gas Appliance Whole Machine Testing Equipment
Household appliance testing equipment
Electrical lifespan testing equipment
Gas valve body testing equipment
Gas pressure switch detection equipment
Gas appliance electrical control testing equipment
Environmental testing equipment
Gas appliance flameout protection equipment inspection and preparation
Sensor detection equipment
Other component testing equipment
Other pressure and airtightness testing equipment for gas appliances
Solution
Gas Appliance Industry
Kitchen appliance industry
Environmental and reliability testing
Other household appliances
other industries
Case
Technical Support
News Center
Company News
Industry News
Contact
About Us
Home
Instrument and Equipment
Gas Appliance Whole Machine Testing Equipment
Household appliance testing equipment
Electrical lifespan testing equipment
Gas valve body testing equipment
Gas pressure switch detection equipment
Gas appliance electrical control testing equipment
Environmental testing equipment
Gas appliance flameout protection equipment inspection and preparation
Sensor detection equipment
Other component testing equipment
Other pressure and airtightness testing equipment for gas appliances
Solution
Gas Appliance Industry
Kitchen appliance industry
Environmental and reliability testing
Other household appliances
other industries
Case
Technical Support
News Center
Company News
Industry News
Contact
About Us
English
中文
English
Get a free quote
Frequently Asked Questions
HOME
Frequently Asked Questions
08
六月
When testing the salt spray test chamber, large rust spots always appear on the surface of the samples, but when the same batch of samples is sent to an external laboratory for testing, it is considered qualified. Is there a problem with your equipment?
Frequently Asked Questions
READ MORE
08
六月
In the aging test of the electric oven, the deviation in temperature control accuracy increases significantly, and the difference between the set temperature and the actual temperature sometimes exceeds 20°C. How is it adjusted?
Frequently Asked Questions
READ MORE
08
六月
In the pulse pressure life test of an electric water heater inner tank, the equipment frequently alarms "pressure holding failure," but no water leakage is visible on the naked eye. How to troubleshoot?
Frequently Asked Questions
READ MORE
08
六月
When performing high-temperature tests in the high and low temperature test chambers, the temperature inside the chamber is stable, but the samples placed at the corners deviate greatly from the actual set temperature. What should be done?
Frequently Asked Questions
READ MORE
08
六月
When testing salt spray test chambers, corrosion results vary greatly between batches. If uneven spraying is suspected, how should it be troubled?
Frequently Asked Questions
READ MORE
08
六月
When testing the salt spray test chamber, large rust spots always appear on the surface of the samples, but when the same batch of samples is sent to an external laboratory for testing, it is considered qualified. Is there a problem with your equipment?
Frequently Asked Questions
READ MORE
08
六月
The calibration results of gas flowmeters differ greatly from their actual use. The same meter can have a large K coefficient for calibration at different units. Who should you trust?
Frequently Asked Questions
READ MORE
08
六月
The air pressure switch test station often misjudges—sometimes the fan is not yet started before the device shows the air pressure switch is closed; Sometimes, when the fan is running normally, the equipment issues a warning of insufficient air pressure.
Frequently Asked Questions
READ MORE
08
六月
The gas proportional valve detection equipment displays flow values that fluctuate frequently, sometimes suddenly spike to a large level and then return to zero, making it impossible to test stably. What should be done?
Frequently Asked Questions
READ MORE
View by category
ALL
Frequently Asked Questions
Latest updates
When testing the salt spray test chamber, large rust spots always appear on the surface of the samples, but when the same batch of samples is sent to an external laboratory for testing, it is considered qualified. Is there a problem with your equipment?
2026-06-08
In the aging test of the electric oven, the deviation in temperature control accuracy increases significantly, and the difference between the set temperature and the actual temperature sometimes exceeds 20°C. How is it adjusted?
2026-06-08
In the pulse pressure life test of an electric water heater inner tank, the equipment frequently alarms "pressure holding failure," but no water leakage is visible on the naked eye. How to troubleshoot?
2026-06-08
When performing high-temperature tests in the high and low temperature test chambers, the temperature inside the chamber is stable, but the samples placed at the corners deviate greatly from the actual set temperature. What should be done?
2026-06-08
When testing salt spray test chambers, corrosion results vary greatly between batches. If uneven spraying is suspected, how should it be troubled?
2026-06-08
Popular tags
万合检测设备
燃气灶具检测设备
Wanhe Testing Equipment
gas stove testing equipment
非标检测设备厂家
实验室仪器设备
壁挂炉检测设备
燃气具整机检测设备厂家
热水器检测设备
燃气壁挂炉检测设备
燃气热水器检测设备
万合检测
灶具检测设备
燃气实验室仪器
热水器检测台
Copyright & copy Zhongshan Wanhe Testing Equipment Development Co., Ltd; All rights reserved
粤ICP备2026076740号
SHORTCUT MENU
Quick Navigation
CONTRACT US
Contact Us
WhatsApp: +86 18307609558
Address: 2nd Floor, Building A, No. 32 Kangsheng Road, Huangpu Town,
Zhongshan City, Guangdong Province;
Email: wanhe1718@gmail.com
WhatsApp
ATTENTION US
Follow us
Home
products
solution
industry case
Technical
Contact
About Us
FAQ
Online Service