Stove Complete Machine Performance Testing Equipment (Production Line) WH-ZJ01-401A

1. Product Introduction

Suitable for various types of embedded and countertop gas stoves, it is used to conduct automatic or manual testing of the durability or reliability of the entire unit under normal operating conditions. Mainly conducts durability testing of gas stoves, including testing the lifespan of gas valves, burners, flameout protection devices, solenoid valves, and overall unit service life.

2. Work environment

1. Operating environment temperature: 0~40°C

2. Operating voltage: AC 220V±10%, 50Hz

3. Relative humidity: (80% [at 25°C]

4. Air source: 0.1~0.6MPa (provided by user), pre-cleaned

5. Gas supply pressure: 4.5~7.5 kPa

3. Technical Parameters

1. Gas appliance counting count and status time can be preset.

2. Manufactured in an integrated two-unit manner, with heat-resistant materials and cabinet structure design, it can simultaneously meet the durability testing and control requirements of two double-burner furnaces, or the above operations for a single furnace.
3. Equipped with a combustion pot system capable of automatic water replenishment; when water is boiled to a low level, it can automatically replenish water (requires connection to tap water and automatic water replenishment control; please make sure to set the automatic water properly).

Dynamic water level).

4. All test stations use mechanical manual operation instead of manual operation, with adjustable operating force, stroke, and torque.

5. The gas pressure on each test bench can be adjusted individually.

6. The durability test bench is equipped with four temperature-collecting thermocouples to collect temperature rise data on burners, stove surfaces, knobs, etc.

7. If the number of unsuccessful ignition cycles at the corresponding workstation or valve body damage causing normal ignition reaches the fault tolerance threshold, it will be considered a fault, alarm, automatic valve stop test, and fault

After elimination, the number of clear nonconformities can be restored to normal, eliminating alarms.

8. When the number of tests reaches the preset value (counting test) or test time (counting test), the test automatically stops and an alarm is triggered.

9. The exhaust hood above the durability test bench is designed to discharge exhaust gases. The exhaust hood is made of stainless steel, explosion-proof, and durable.

10. The test bench is equipped with four temperature-acquiring thermocouples to collect and transmit temperature rise data on burners, stoves, and other components.

11. Number of workstations: 20.

12. Power supply voltage: AC220V, 50Hz.

13. Power: 2.5KW.

14. Temperature range: Room temperature ~120°C.

15. Each LED indicator light indicates the operating status of the corresponding thermostat.

This page links https://www.zswanhe.com/en/product-detail/BPLzr3lB