Self-priming solenoid valve performance aging test equipment WH-ZJ01-409

1. Product specifications

1. Number of tests: 0~999999 (pre-adjustable);

2. Operating frequency: 0~30 times/min (pre-adjustable);

3. Solenoid valve suction valve voltage: 0.0V~30.0V (adjustable);

4. Solenoid valve holding voltage: 0.0V~30.0V (adjustable);

5. Compressed air adjustable between 0.5kPa~10kPa.

2. Product Advantages

1. Design 5 workstations;

2. LED display of test parameters;

3. The number of tests, operating frequency, and operating voltage can be freely adjusted according to actual test requirements;

4. Count the number of operations at each workstation individually;

5. The installation position of each workstation can be adjusted left, right, forward, or backward;

6. Each workstation is equipped with matching fixtures that allow compressed air to be introduced for testing;

7. The operating status of each solenoid valve during each test is monitored by indicator lights; If a solenoid valve is damaged during testing, the test automatically stops and an alarm is triggered;

8. Power-off memory function for test parameters;

9. The number of tests can be preset; once the number of tests is reached, the test automatically stops and an alarm sounds;

Features of the WH-ZJ01-407 Solenoid Valve Durability Test Bench: Can simultaneously test 1-3 circuits, with various parameters set individually. Simple and clear operation, easily meets user requirements.

3. Work Indicators

(1) Technical Parameters

1. Working environment

● Operating voltage: AC 220V±10%, 50Hz;

● Operating temperature: -25°C~85°C, humidity RH (0~95%).

2. Operational performance

● Number of tests: 0~999999 times (preset)

● Strong suction time: 0~99.99 seconds (customizable)

● Duration: 0~99.99 S (customizable)

● Stop time: 0~99.99 seconds (setable)

● Solenoid valve suction valve voltage: 0.0V~30.0V (adjustable)

● Solenoid valve holding voltage: 0.0V~30.0V (adjustable)

● Solenoid valve strong suction overcurrent alarm: 3.0A

● Solenoid valve overcurrent alarm: 3.0A

(2) Performance

1. Number of workstations: 5

2. The number of tests, operation time, and working voltage can be freely adjusted according to actual test requirements;

3. Compressed air can be added for testing, with adjustable air pressure within the range of 2500Pa~4000Pa;

4. Count the number of operations at each workstation individually;

5. The operating status of each solenoid valve during each test is monitored by indicator lights; If a solenoid valve is damaged during testing, an audible and visual alarm will appear;

6. Test parameters have power-off memory function;

7. The number of test cycles can be preset; when the preset number is reached, the test automatically stops and triggers an alarm;

8. Workflow: Solenoid valve powered on to work (strong suction time and hold time indicator lights light both lit; suction time and hold time can be 0~99. 99S

Set à solenoid valve to strongly suction (close the valve) and maintain à hold time until à solenoid valve disconnects à enters stop time timing (stop time can be set to 0~99.

99S setting) → Air pressure detection status, determines the solenoid valve is working properly based on air pressure, station counter counts (no air pressure detection state, direct).

Count) → Lower work cycle.

9. Power-off memory function: all set time parameters and test counts can be saved even after power outage.

10. During testing, you can press the stop button to stop all tests; Alternatively, the start/stop switch of a single workstation can be set to the 'off' position to stop a specific workstation

Testing the position.

11. If the total counter is set to countdown mode, after the set number of attempts is reached, the instrument will sound an alarm and lock for a long time. At this time, you can only press the "Reset" button on the total counter...

This page links https://www.zswanhe.com/en/product-detail/B8LDJrPB