Performance Aging Test Equipment for Stove Shutdown Solenoid Valves WH-ZJ01-407A

1. Product Introduction

This equipment is developed according to relevant gas appliance standards and undergoes aging tests on the stove's shut-off solenoid valve. It uses PLC + touchscreen control, high-quality components, reasonable design, simple operation, high stability, and durability. Read all product manuals carefully. Reference standard: GB16410 household gas stove GB/T16411 General test method for household gas appliances CJ/T3072 household gas appliance plug valve assembly.

2. Product specifications

1. Number of tests: 0~999999 (pre-adjustable);

2. Operating frequency: 0~30 times/min (pre-adjustable);

3. Solenoid valve suction valve voltage: 0.0V~30.0V (adjustable);

4. Solenoid valve holding voltage: 0.0V~30.0V (adjustable);

5. Compressed air adjustable between 0.5kPa~10kPa.

3. Product advantages

1. Design 3 workstations;

2. LED display of test parameters;

3. The number of tests, operating frequency, and operating voltage can be freely adjusted according to actual test requirements;

4. Count the number of operations at each workstation individually;

5. The installation position of each workstation can be adjusted left, right, forward, or backward;

6. Each workstation is equipped with matching fixtures that allow compressed air to be introduced for testing;

7. The operating status of the solenoid valve for each test is monitored by indicator lights; If a solenoid valve is damaged during testing, the test will automatically stop and an alarm will sound;

8. Power-off memory function for test parameters;

9. The number of tests can be preset; once the number of tests is reached, the test automatically stops and an alarm sounds;

Features of the WH-ZJ01-407 solenoid valve durability test bench: can simultaneously test 1-3 circuits, with various parameters set individually. Simple and clear operation, easily meeting user requirements.

3. Work Indicators

(1) Technical Parameters

1. Working environment

● Operating voltage: AC 220V±10%, 50Hz;

● Operating temperature: -25°C~85°C, humidity RH (0~95%).

2. Operational performance

● Number of tests: 0~999999 times (preset)

● Strong suction time: 0~99.99 seconds (customizable)

● Duration: 0~99.99 S (customizable)

● Stop time: 0~99.99 seconds (setable)

● Solenoid valve suction valve voltage: 0.0V~30.0V (adjustable)

● Solenoid valve holding voltage: 0.0V~30.0V (adjustable)

● Solenoid valve strong suction overcurrent alarm: 3.0A

● Solenoid valve overcurrent alarm: 3.0A

(2) Performance

1. Number of workstations: 3

2. The number of tests, operation time, and working voltage can be freely adjusted according to actual test requirements;

3. Compressed air can be added for testing, with adjustable air pressure within the range of 2500Pa~4000Pa;

4. Count the number of operations at each workstation individually;

5. The operating status of each solenoid valve during each test is monitored by indicator lights; If a solenoid valve is damaged during testing, an audible and visual alarm will appear;

6. Test parameters have power-off memory function;

7. The number of test cycles can be preset; when the preset number is reached, the test automatically stops and triggers an alarm;

8. Workflow: Solenoid valve power-on operation (strong suction time and maintenance time indicator lights light both lit; strong suction time and hold time can be set to 0~99. 99S) → solenoid valve strong suction (closing valve) and maintaining à hold time until the solenoid valve disconnects à enters stop time timing (stop time can be set to 0~99 seconds). 99S setting) à Air pressure detection status, based on air pressure, determine that the solenoid valve is working normally, station counter counts (no air pressure detection, direct count) → Lower working cycle.

9. Power-off memory function: all set time parameters and test counts can be saved even after power outage.

10. During testing, you can press the stop button to stop all tests; Alternatively, the start/stop switch for a single workstation can be set to the 'off' position to stop testing at a specific workstation.

11. If the total counter is set to countdown mode, after the set number of attempts is reached, the instrument will sound an alarm and lock for a long time. At this time, you can only press the "Reset" button on the total counter...

This page links https://www.zswanhe.com/en/product-detail/B3LDe9oN